FMT E-100 and E-101 series EKG cables are designed specially for diagnostic applications. E-100 EKG cables are in the one piece form with fixed leads, E-101 ECG cables are in the detachable form with replaceable leads.

All of the leads are clearly identified by color code and inerasable, embossed plastics location designator. To ensure correct application of the electrodes, their positions and color codes are indicated on the trunk cable yoke. FMT ECG cables are color coded and imprinted in either IEC or AHA protocols.

Specially designed, fully shielded low noise cable minimizes electrical noise and interface to provide maximum signal quality. For additional signal protection semi conductive PVC layer used with inner shield.

Specially designed, polyurethane jacketed yoke and lead cables, flexible bend reliefs at the connector and cable yoke provide extra durability and extend product life. Inner conductors of the cables are Kelvar filled tinned tinsel for strength and durability.

FMT EKG cables use all medical grade Polyurethane, Santroprene, Polypropylene and ABS components. No LATEX. No PVC to maximize patient safety and comfort by minimizing the risk of bio-compatibility problems.

FMT EKG cables can be supplied with or without resistors. 4.7 kΩ, 10 kΩ and 20 kΩ resistor options available. Resistors for defibrillation protection are safely housed in the cable yoke.

Lead wires terminated to 4.0 mm nickel-plated banana, 4.0 mm nickel-plated insulated banana, 3.2 mm straight pin, snap or grabber. FMT also offers compatible leadwires for various ECG manufacturers. Please see the Diagnostic EKG Cables Product Selection Document for available types.

The wide range of available connectors make FMT diagnostic EKG cables compatible with most of the EKG devices in the market. Please refer to Diagnostic EKG Cables Product Selection Document for product compatibility.

The wide range of available connectors make FMT diagnostic EKG cables compatible with most of the EKG devices in the market. Please refer to related tables for product compatibility.

FMT diagnostic EKG cables have part, lot and serial numbers to ensure equipment compatibility and product traceability.

FMT suction chest electrodes with universal connection, are suitable for use with 3.2 mm straight pin, 4.0 mm banana or snap lead termination leadwires.

All of the metallic surfaces of FMT suction chest electrodes are Silver–Silver Chloride (Ag/AgCl) plated to provide maximum signal quality.

The outer diameter of suction bowl is 24.5 mm. The outer diameter of the rubber bulb is 32.5 mm.

FMT suction chest electrodes supplied in package of 6 pieces set.

FMT clamp electrodes with universal connection are suitable for use with 3.2 mm straight pin, 4.0 mm banana or snap lead termination leadwires.

All of the metallic surfaces of FMT clamp electrodes are Silver –Silver Chloride (Ag/AgCl) plated to provide maximum signal quality.

FMT clamp electrodes are color coded IEC or AHA protocols. (IEC Color Code: Red, Green, Yellow, Black and AHA Color Code: Red, Green, White, Black)

The lengths of clamp electrodes are 140 mm for adult size, 89 mm for pediatric size.

FMT clamp electrodes supplied in package of 4 pieces set.

FMT medical grade Banana to Snap Adaptors allows you to easily connect 3.2 mm straight pin and 4.0 mm banana plug leadwires to disposable ECG electrodes with 4.0 mm snap studs.

FMT Banana to Snap Adaptors supplied in package of 10 pieces set.

FMT medical grade Banana to Grabber Adaptors convert 3.2 mm straight pin and 4.0 mm banana plug leadwires to disposable ECG electrodes with 4.0 mm snap studs.

FMT Banana to Grabber Adaptors supplied in package of 10 pieces set.

FMT medical grade Banana to Alligator Clip Adaptors allows you to easily connect 4.0 mm banana plug leadwires to disposable ECG electrodes with tab connectors.

FMT Banana to Alligator Clip Adaptors supplied in package of 10 pieces set.