| Patient Monitoring ECG Cables |
|
|
Patient Monitoring ECG Cables
FMT patient monitoring ECG cables are designed for measuring ECG and impedance respiration in adult and pediatric patients. FMT patient ECG cables family includes E-200, E-201, E-202, E-204, E-205 and E-207 series. E-200 is one piece (monolithic) patient cable with molded, permanently fixed leadwires. 3, 4 and 5 leaded options are available. E-201 detachable type patient cable has replaceable unshielded leadwires with Safety 1.6 mm DIN style connector. 3 and 5 leaded options are available. Using of FMT-NE disposable prewired neonatal / pediatric electrodes make E-201 patient cables suitable for use with neonatal patients. E-202 detachable type patient cable has replaceable shielded leadwires with dual socket connector. 3 and 5 leaded options are available. E-204 detachable type patient cable has replaceable shielded leadwires with GE type dual socket connector. 3 and 5 leaded options are available. E-204 patient cables are specially designed for use with GE type leadwires. E-205 detachable type patient cable has replaceable shielded leadwires with PHILIPS type dual socket connector. 3 and 5 leaded options are available. E-205 patient cables are specially designed for use with PHILIPS type leadwires. E-207 detachable type patient cable has replaceable shielded leadwire set with eight pole socket connector. E-207 patient cables are specially designed for use with NIHON KOHDEN type 3 leaded leadwire set. All of the leads are clearly identified by color code and inerasable, embossed plastics location designator. To ensure correct application of the electrodes, their positions and color codes are indicated on the trunk cable yoke. FMT ECG cables are color coded and imprinted in either IEC or AHA protocols. Specially designed, fully shielded low noise cable minimizes electrical noise and interface to provide maximum signal quality. For additional signal protection cable yoke is also shielded. Specially designed, polyurethane jacketed yoke and lead cables, flexible bend reliefs at the connector and cable yoke provide extra durability and extend product life. Inner conductors of the cables are Kelvar filled tinned tinsel for strength and durability. FMT patient monitoring ECG cables use all medical grade polyurethane, Santroprene, Polypropylene and ABS components. No LATEX. No PVC to maximize patient safety and comfort by minimizing the risk of bio-compatibility problems. FMT patient monitoring ECG cables can be supplied with or without resistors. 1.0 kΩ and 4.7 kΩ resistor options available. Resistors for defibrillation protection are safely housed in the cable yoke. Lead wires terminated to snap or grabber. The wide range of available connectors make FMT patient monitoring ECG cables compatible with most of the patient monitors in the market. Please refer to Patient Monitoring ECG Cables Product Selection Document for product compatibility. FMT patient monitoring ECG cables have part, lot and serial numbers to ensure equipment compatibility and product traceability. All FMT products meet the requirements of MDD/93/42/EEC and CE marked. |
|
|
|
|
FMT Prewired Neonatal / Pediatric ECG Electrodes
FMT NE Neonatal ECG Electrodes are 22 mm in diameter and consist of a conductive adhesive hydro gel, a Silver–Silver Chloride (Ag/AgCl) plated patient contact, a non-woven substrate and a 60cm flexible tinned copper or carbon lead-wire terminating in a standard Safety 1.6 mm DIN style connector. NE Neonatal ECG Electrodes supplied 3 pieces set in a pouch. Noise free traces are obtained with the high quality very low impedance, hypoallergenic gel. Radiolucent version of the prewired neonatal/pediatric ECG electrodes is also available upon request.
|
